FCG-700 Frame Code Generator
Frame Code Generator
  • Generates frame codes sequentially from 000,000 to 299,999 (3 hours 20 minutes)
  • Frame Code is inserted into the seventeenth and eighteen lines of the vertical blanking intervals of the video signal.
  • Start point can be set from 000,000 to 299,999.
  • Three start triggers, an external pulse, a cue tone and the manual mode can be set.
  • The Frame Code and the status of the Frame Code Generator can be superimposed on the picture output from the VIDEO OUT-2 connector while recording.
  • 19 inch rack mountable.

See also the connection diagram

Power requirements
AC 220-240V, 50/60Hz

Power consumption

Approx. 424(W) x 49(H) x 256(D)mm

Approx. 3.3kg (7.13 lb)

Video in
BNC, 1.0Vp-p (at 75Ω on/off selectable)

Video out 1
BNC, 1.0Vp-p (at 75Ω load)

Video out 2
BNC, 1.0Vp-p (at 75Ω load)

Audio in
XLR, +4dB
Phone, -5dB

Audio out
XLR, +4dB
Phono, -5dB

External pulse in
BNC, TTL level

Supplied accessories
Rack mount brackets
Operation manual
AC cord