|
System:
Video head:
Rotary four-head (R/P with simultaneous playback)
Video recording system:
Helical scanning
Luminance:
FM recording
Chrominance:
SC low-range conversion recording
Video signal system:
CCIR: PAL or SECAM colour
Video:
Input:
BNC: 1.OVP-P +- 0.3V, 75 ohms, unbalanced sync negative
Output:
BNC: 1.0Vp-p +- 0,2V, 75 ohms, unbalanced sync negative
Camera connector:
Q type 14-pin
Horizontal resolution:
250 lines
Signal-to-noise ratio:
Color: better than 45dB
External sync input:
On VIDEO IN during playback
Audio:
Inputs:
CAMERA MIC: -20dB/-60dB switchable, 3K ohms, balanced
LINE: +4dB, 10K ohms, balanced
Microphone:
-60dB, more than 3k impedance, balanced.
Outputs:
EARPHONE: -20dB to -33dB, (at 8 ohms load)
MONITOR: +4dB (at 600 ohm load), balanced.
Signal-to-noise ratio:
Better than 50dB
|
Frequency response:
50Hz to 15kHz
Wow and Flutter
Less than 0,2% rms
Tape transport:
Tape speed:
9,53 cm/sec
Recording and playback time:
20 min continuously with Sony KCS-20 tape
10 min continuously with Sony KCS-10 tape
Fast forward and Rewind time:
Less than 3 min with Sony KCS-20 tape
Operating time
Approx. 1 hour continuously to a DXC-M3 series camera and the recorder, with two
fully charged NP-1 batteries.
Videocassette:
Sony KCS (BRS and XBR series tape)
General:
Remote
Special mini type
Power requirements:
12V DC
Power consumption:
DC 15.5W
Operating temperature:
5C to 40C (41F to 104F)
Dimensions:
Approx. 258(W) x 117(H) x 338(D) mm
Weight:
Approx. 5.5 kg
Supplied accessories:
Carrying case, shoulder strap, camera adaptor, Earphone.
|
